dpkg-buildpackage: set CPPFLAGS to default value: 
dpkg-buildpackage: set CFLAGS to default value: -g -O2
dpkg-buildpackage: set CXXFLAGS to default value: -g -O2
dpkg-buildpackage: set FFLAGS to default value: -g -O2
dpkg-buildpackage: set LDFLAGS to default value: -Wl,-Bsymbolic-functions
dpkg-buildpackage: source package libfile-fnmatch-perl
dpkg-buildpackage: source version 0.02-3zajac3
dpkg-buildpackage: source changed by Blair Zajac <blair@orcaware.com>
dpkg-buildpackage: host architecture i386
 fakeroot debian/rules clean
dh_testdir
dh_testroot
dh_clean build-stamp install-stamp
# Add commands to clean up after the build process here
[ ! -f Makefile ] || /usr/bin/make realclean
 dpkg-source -b File-FnMatch-0.02
dpkg-source: warning: source directory './File-FnMatch-0.02' is not <sourcepackage>-<upstreamversion> 'libfile-fnmatch-perl-0.02'
dpkg-source: warning: .orig directory name File-FnMatch-0.02.orig is not <package>-<upstreamversion> (wanted libfile-fnmatch-perl-0.02.orig)
dpkg-source: building libfile-fnmatch-perl using existing libfile-fnmatch-perl_0.02.orig.tar.gz
dpkg-source: building libfile-fnmatch-perl in libfile-fnmatch-perl_0.02-3zajac3.diff.gz
dpkg-source: building libfile-fnmatch-perl in libfile-fnmatch-perl_0.02-3zajac3.dsc
 debian/rules build
dh_testdir
# As this is a architecture dependent package, we are not
# supposed to install stuff to /usr/share. MakeMaker creates
# the dirs, we prevent this by setting the INSTALLVENDORARCH
# and VENDORARCHEXP environment variables.
# Add commands to compile the package here
/usr/bin/perl Makefile.PL INSTALLDIRS=vendor \
		INSTALLVENDORARCH=/usr/lib/perl5/ \
		VENDORARCHEXP=/usr/lib/perl5/
Checking if your kit is complete...
Looks good
Writing Makefile for File::FnMatch
/usr/bin/make OPTIMIZE="-Wall -g -O2" LD_RUN_PATH=""
make[1]: Entering directory `/tmp/blair/z/File-FnMatch-0.02'
cp FnMatch.pm blib/lib/File/FnMatch.pm
/usr/bin/perl /usr/share/perl/5.8/ExtUtils/xsubpp  -typemap /usr/share/perl/5.8/ExtUtils/typemap  FnMatch.xs > FnMatch.xsc && mv FnMatch.xsc FnMatch.c
cc -c  -I. -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -g -O2   -DVERSION=\"0.02\" -DXS_VERSION=\"0.02\" -fPIC "-I/usr/lib/perl/5.8/CORE"   FnMatch.c
In file included from FnMatch.xs:7:
ppport.h:2979:1: warning: "PERL_UNUSED_DECL" redefined
In file included from FnMatch.xs:2:
/usr/lib/perl/5.8/CORE/perl.h:163:1: warning: this is the location of the previous definition
FnMatch.xs: In function ‘boot_File__FnMatch’:
FnMatch.xs:69: warning: suggest parentheses around assignment used as truth value
Running Mkbootstrap for File::FnMatch ()
chmod 644 FnMatch.bs
rm -f blib/arch/auto/File/FnMatch/FnMatch.so
cc  -shared -L/usr/local/lib FnMatch.o  -o blib/arch/auto/File/FnMatch/FnMatch.so 	\
	     	\
	  
chmod 755 blib/arch/auto/File/FnMatch/FnMatch.so
cp FnMatch.bs blib/arch/auto/File/FnMatch/FnMatch.bs
chmod 644 blib/arch/auto/File/FnMatch/FnMatch.bs
Manifying blib/man3/File::FnMatch.3pm
make[1]: Leaving directory `/tmp/blair/z/File-FnMatch-0.02'
/usr/bin/make test
make[1]: Entering directory `/tmp/blair/z/File-FnMatch-0.02'
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01use............ok
t/10use_fnmatch....ok
All tests successful.
Files=2, Tests=14,  0 wallclock secs ( 0.00 cusr +  0.09 csys =  0.09 CPU)
make[1]: Leaving directory `/tmp/blair/z/File-FnMatch-0.02'
touch build-stamp
 fakeroot debian/rules binary
dh_testdir
dh_testroot
dh_clean -k
# Add commands to install the package into debian/ACKAGE_NAME here
/usr/bin/make install DESTDIR=/tmp/blair/z/File-FnMatch-0.02/debian/libfile-fnmatch-perl PREFIX=/usr
make[1]: Entering directory `/tmp/blair/z/File-FnMatch-0.02'
Installing /tmp/blair/z/File-FnMatch-0.02/debian/libfile-fnmatch-perl/usr/lib/perl5/auto/File/FnMatch/FnMatch.bs
Installing /tmp/blair/z/File-FnMatch-0.02/debian/libfile-fnmatch-perl/usr/lib/perl5/auto/File/FnMatch/FnMatch.so
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /tmp/blair/z/File-FnMatch-0.02/debian/libfile-fnmatch-perl/usr/lib/perl5/File/FnMatch.pm
Installing /tmp/blair/z/File-FnMatch-0.02/debian/libfile-fnmatch-perl/usr/share/man/man3/File::FnMatch.3pm
make[1]: Leaving directory `/tmp/blair/z/File-FnMatch-0.02'
touch install-stamp
dh_testdir
dh_testroot
dh_installexamples 
dh_installdocs README
dh_installchangelogs Changes
dh_shlibdeps
dh_strip
dh_perl
dh_compress
dh_fixperms
dh_installdeb
dh_gencontrol
dpkg-gencontrol: warning: unknown substitution variable ${misc:Depends}
dh_md5sums
dh_builddeb
dpkg-deb: building package `libfile-fnmatch-perl' in `../libfile-fnmatch-perl_0.02-3zajac3_i386.deb'.
 dpkg-genchanges  >../libfile-fnmatch-perl_0.02-3zajac3_i386.changes
dpkg-genchanges: not including original source code in upload
dpkg-buildpackage: binary and diff upload (original source NOT included)